Tef ɗin Emi Gasket ɗin Jumla - EMI Garkuwar Fim tare da Kyakkyawan Garkuwa - Mai Sa'a mai haɓakawa
Tef ɗin Emi Gasket ɗin Jumla - EMI Garkuwar Fim tare da Kyakkyawan Garkuwa - Mai Sa'a mai haɓakawa
Tef ɗin Emi Gasket ɗin Jumla - EMI Garkuwar Fim tare da Kyakkyawan Garkuwa - Cikakken Cikakkun Sabunta:
Bayanin Samfura
EMI Shielding Film ana amfani dashi ne a cikin FPC wanda ya ƙunshi Modules don wayar hannu, PC, na'urorin likitanci, kyamarar dijital, kayan aikin mota, da dai sauransu.
Samfuran Samfura
LKES-800
LKES-1000
LEKS-6000
Siffofin Samfur
(1) Kyakkyawan halayen sarrafawa
(2) Kyakkyawar halayen lantarki
(3) Kyawawan kayan kariya
(4) Kyakkyawan juriya na zafi
(5) Abokan Muhalli (Kyauta Halogen, cika buƙatun RoHS Directives da REACH, da sauransu)
Tsarin Samfur
Halayen Samfur
LKES-800
| Abu | Gwaji Data | Gwaji misali ko Hanyar Gwaji |
| Kauri (Kafin Lamination, μm) | 16 ± 10% | Matsayin Kasuwanci |
| Kauri (Bayan Lamination, μm) | 13 ± 10% | Matsayin Kasuwanci |
| Resistance ƙasa (Gold plated, φ 1.0mm, 1.0cm, Ω) | JIS C5016 1994-7.1 | |
| Ƙarfin peeling na ƙarfafa fim (N/25mm) | Matsayin Kasuwanci | |
| Sake Guduwar Siyar da Kyauta mara guba (MAX 265 ℃) | Babu stratification; Babu kumfa | JIS C6471 1995-9.3 |
| Solder (288 ℃, 10s, sau 3) | Babu stratification; Babu kumfa | JIS C6471 1995-9.3 |
| Abubuwan Garkuwa (dB) | >50 | GB/T 30142-2013 |
| Resistance Surface (mΩ/□) | 350 | Hanyar Tasha Hudu |
| Mai hana wuta | VTM-0 | Farashin UL94 |
| Halin Bugawa | WUCE | JIS K5600 |
| Haskaka(60°, Gs) | 20 | GB9754-88 |
| Juriya na Chemical (Acid, Alkali da OSP) | WUCE | JIS C6471 1995-9.2 |
| Adhesion zuwa Stiffener (N/cm) | ：4 | IPC-TM-650 2.4.9 |
LKES-1000
| Abu | Gwaji Data | Gwaji misali ko Hanyar Gwaji |
| Kauri (Bayan Lamination, μm) | 14-18 | Matsayin Kasuwanci |
| Abubuwan Garkuwa (dB) | ≥50 | GB/T 30142-2013 |
| Insulation Surface | ≥200 | Matsayin Kasuwanci |
| Adhesive Fastness(Gwajin sel ɗari) | Babu tantanin halitta ya fadi | JIS C 6471 1995-8.1 |
| Mai jure wa Shafa barasa | Sau 50 babu lalacewa | Matsayin Kasuwanci |
| Resistance Scratch | Sau 5 babu Leakalar karfe | Matsayin Kasuwanci |
| Resistance ƙasa, (Tsarin Zinare, φ 1.0mm, 1.0cm, Ω) | ≤1.0 | JIS C5016 1994-7.1 |
| Sake Guduwar Siyar da Kyauta mara guba (MAX 265 ℃) | Babu stratification; Babu kumfa | JIS C6471 1995-9.3 |
| Solder (288 ℃, 10s, sau 3) | Babu stratification; Babu kumfa | JIS C6471 1995-9.3 |
| Halin Bugawa | WUCE | JIS K5600 |
LKES-6000
| Abu | Gwaji Data | Gwaji misali ko Hanyar Gwaji |
| Kauri (Bayan Lamination, μm) | 13 ± 10% | Matsayin Kasuwanci |
| Abubuwan Garkuwa (dB) | ≥50 | GB/T 30142-2013 |
| Resistance ƙasa, (Gold plated, φ 1.0mm, 1.0cm, Ω) | ≤0.5 | JIS C5016 1994-7.1 |
| Resistance ƙasa, (Gold plated, φ 1.0mm, 3.0cm, Ω) | 0.20 | JIS C5016 1994-7.1 |
| Ƙarfin fitarwa (N/cm) | Matsayin Kasuwanci | |
| Surface Insulation (mΩ) | ≥200 | Matsayin Kasuwanci |
| Adhesive Fastness(Gwajin tantanin halitta ɗari) | Babu tantanin halitta ya fadi | JIS C 6471 1995-8.1 |
| Sake Guduwar Siyar da Kyauta mara guba (MAX 265 ℃) | Babu stratification; Babu kumfa | JIS C6471 1995-9.3 |
| Solder (288 ℃, 10s, sau 3) | Babu stratification; Babu kumfa | JIS C6471 1995-9.3 |
| Mai hana wuta | VTM-0 | Farashin UL94 |
| Halin Bugawa | WUCE | JIS K5600 |
Shawarar Gudanarwa
| Hanyar Lamination | Yanayin lamination | Halin ƙarfafawa | |||
| Zazzabi(℃) | Matsi (kg) | Lokaci (s) | Zazzabi (℃) | Lokaci (minti) | |
| Quick-Lamination | LKES800/6000:180±10LKES1000:175±5 | 100-120 | 80-120 | 160± 10 | 30-60 |
Lura: Abokin ciniki na iya daidaita fasaha bisa ainihin yanayin lokacin sarrafawa.
(1) Bare kashe kariya Layer farko, sa'an nan bond zuwa FPC, 80 ℃ Dumi tebur za a iya amfani da pre bonding.
(2) Laminate daidai da tsarin da ke sama, fitar da shi, sa'an nan kuma kwasfa fim ɗin mai ɗaukar hoto bayan sanyaya.
(3) Tsari mai ƙarfi.
Shiryawa
(1) Daidaitaccen Bayani na samfur: 250mm × 100m.
(2) Bayan cire tsayayyen wutar lantarki, samfuran suna cushe a cikin takarda foil na aluminum kuma suna sanya bushewa a ciki.
(3) A waje an cika shi a cikin akwatunan takarda kuma an gyara su don tabbatar da amincin samfuran yayin sufuri da sarrafawa, da kuma guje wa lalacewa.
Adana da Hankali
(1) Shawarar Ma'ajiya Na Shawarar
Zazzabi: (0-10) ℃; Humidity: ƙasa da 70% RH
(2) Hankali
(2.1) Don Allah kar a buɗe kunshin waje kuma daidaita fim ɗin garkuwa a cikin zafin jiki na awanni 6 kafin amfani da shi don rage tasirin sanyi da raɓa akan fim ɗin garkuwa.
(2.2) Ba da shawarar da za a yi amfani da shi da wuri-wuri bayan cirewa daga ajiyar sanyi, idan akwai canjin inganci a ƙarƙashin yanayin zafi na al'ada na dogon lokaci.
(2.3) Wannan samfurin ba shi da juriya ga wakili na hatimi na ruwa da juyi, idan yana da fasahar sarrafawa na sama, da fatan za a gwada kuma tabbatar da farko.
(2.4) Ba da shawara mai sauri lamination, injin laminating yana buƙatar gwadawa da tabbatarwa.
(2.5) Lokacin garanti mai inganci a ƙarƙashin yanayin sama shine watanni 6.
Hotuna dalla-dalla samfurin:
Jagoran Samfuri masu alaƙa:
High quality Very first,and Consumer Supreme is our guideline to offer the most m service to our customers.At present, we're tryinging our great to be among top exporters in our area to fulfill buyers far more need to have for Wholesale Emi Gasket Tef - EMI Garkuwar Fim tare da Garkuwa Mai Kyau - Lucky Innovative , A samfurin zai wadata ga duk faɗin duniya, Amurka, kamar: manne da ka'idar daidaitaccen abokin ciniki, tushen inganci, kyakkyawan aiki, raba amfanin juna. Muna fata, tare da ikhlasi da kyakkyawar niyya, don samun karramawa don taimakawa tare da ƙarin kasuwar ku.
By Beryl daga Muscat - 2017.10.25 15:53 Wannan masana'antun ba kawai mutunta zabinmu da bukatunmu ba, amma kuma sun ba mu shawarwari masu kyau da yawa, a ƙarshe, mun sami nasarar kammala ayyukan siye.
By Lisa daga Najeriya - 2018.05.13 17:00 
