Fim ɗin Ƙwararriyar Mota na Cikin Gida na Mota - Fim ɗin Adon Cikin Mota na Cikin Gida ta atomatik - Fim ɗin Mai Sa'a

Gabatarwar Samfur

In-Mold Decoration INS fim ne hada da PMMA fim tare da bugu mai hoto ado sakamako da kuma ABS film, Yana da kyau kwarai gyare-gyaren Properties da m surface kariya sakamako, dace da surface ado na roba kayayyakin tare da Deep mikewa da karko bukatun, musamman ga Automotive ciki.

Tsarin Samfur

Tasirin Fim

Sakamakon kayan ado na fim ɗin yana da ƙwayar itace, ƙarfe mai goge, mosaic, hatsin da aka saka da sauran kayan fasaha, tasirin watsa haske na gida yana samuwa. Kuma ana samun fina-finai na musamman bisa ga buƙatun kowane abokin ciniki.

Tsarin Aikace-aikacen

Fim ɗin INS ya shafi tsarin INS, shimfiɗar 3D tare da babban matsi na gyare-gyaren farko, yanke abin da aka saka bisa ga bayyanar samfurin, sannan sanya abin da aka saka a cikin rami mai ƙyalƙyali daidai, a ƙarshe yin gyare-gyaren allura.

Amfani

Babu ƙarin farashin ƙirar ƙira da zai iya fahimtar kyawawan abubuwa don sarrafa launi da yawa, ƙarancin fitarwar VOC da rage sharar gida.

Aikace-aikacen Cikin Mota

Fim ɗin INS galibi ana amfani da shi ne a cikin Automotive ciki, misali kofa panel da kayan aiki da sauransu.

Halayen Samfur

Jagoran Gudanarwa

(1) Thermoforming
1.1 Ana buƙatar kayan aiki kamar na'ura mai ƙira, gyarawa da gyare-gyare.

(2) Adana
(2.1) Fina-finan INS yakamata a adana su a ƙarƙashin yanayin aiki na yau da kullun. Akwatunan da ke ɗauke da nadi na fina-finan INS yakamata a adana su a kwance. Kada a adana wannan kayan a waje, a wuraren zafi mai zafi ko kuma inda za'a iya samun matsananciyar zafi. Ya kamata a kiyaye yanayin zafi da ke ƙasa da daskarewa kuma sama da 35 ° C.
(2.2) Idan za a sake adana nadi na fim ɗin, dole ne a nannade shi a cikin shingen tururi tare da masu bushewa a ciki. Ana buƙatar kunsa a rufe tare da tef ɗin PET, sannan a rufe shi a ƙarshen ƙarshen tare da filogi mai mahimmanci ko wani abu makamancin haka.
(2.3)Ajiye da aka ba da shawarar shine 25°C ko mai sanyaya a mafi ƙarancin yanayin zafi mai yuwuwa. Sake bushewa bayan watanni 5-6.
(2.4) Ana ba da shawarar yin busassun zanen gado na kwanaki 2 a 70 ℃, cike da mirgine da ba a rufe ba. 48 ~ 72 hours a 60 ℃ a cikin wani wurare dabam dabam tanda.

(3) Samuwar
(3.1) Slow dumama na fim, zai fi dacewa dumama da fim baya gefe niyya a takardar zafin jiki na 120 ℃ ~ 145 ℃ auna ta zazzabi labels.it dogara a kan daban-daban part da film irin.
(3.2) An fi son yin aiki a cikin ɗaki mai tsabta.

(4) Gyara
(4.1) Ana ba da shawarar yin amfani da yankan Laser, ko yanke yankan, gabaɗaya ya mutu yankewa.Lokacin da aka gyara, tabbatar da cewa kayan ba su lalace ba, babu ƙura, ƙazanta da ƙazanta, tarkace tarkace a saman.
(4.2) Don guje wa lalacewar ƙasa muna ba da shawarar ayyuka masu zuwa:
(4.2.1)Kada ku tari kan juna ba tare da laushi ko kyalle tsakanin kowane bangare ba.
(4.2.2) Duk ma'aikata su sa safar hannu mai laushi ko latex.
(4.2.3) Don guje wa ɗaukar ƙura ko gurɓata muna ba da shawarar amfani da na'urorin anti-static waɗanda aka kera musamman don yanayin ɗaki mai tsabta.

(5) Saka gyare-gyare
(5.1) Babu kayan aiki na musamman da ake buƙata lokacin sarrafa fim ɗin INS. Ana iya amfani da kayan gyare-gyare na zamani; duk da haka, ya kamata a yi ko gyara su don karɓar fim ɗin a cikin rami. Karin shawarwari:
(5.2) Zazzabi na diaphragm da aka saka a cikin rami ya kamata ya zama 30-50 ° C.
(5.3) Fim ɗin wasan sada zumunci don hana wankewa daga launi ko zane.
(5.4)Zazzaɓin guduro kamar yadda mai siyarwar guduro ya ba da shawarar.