2021 Babban Takarda Prescale - Fim ɗin Auna Matsa lamba 1/2/3/4/5LW MW MS - Mai Sa'a Innovative

Jerin samfuran

(1)Lambar samfur:Matsakaicin Matsakaicin 1LW

Nisa: 270mm

Tsawon: 10m

Rage Matsi (Mpa): 2.5-10

Nau'in: Shet Biyu

(2) Lambar samfur: Super Low Pressure 2LW

Nisa: 270mm

Tsawon: 6m

Rage Matsi (Mpa): 0.5-2.5

Nau'in: Shet Biyu

(3) Lambar samfur: Ultra-Super Low Pressure 3LW

Nisa: 270mm

Tsawon: 5m

Rage Matsi (Mpa): 0.2-0.6

Nau'in: Shet Biyu

(4) Lambar samfur: Matsanancin Ƙarfin Matsi 4LW

Nisa: 310mm

Tsawon: 3m

Rage Matsi (Mpa): 0.05-0.2

Nau'in: Shet Biyu

(5) Lambar samfur: Matsanancin Ƙarfin Matsi 5LW

Nisa: 310mm

Tsawon: 2m

Matsayin Matsi (Mpa): 0.006-0.05

Nau'in: Shet Biyu

(6) Lambar samfur: Matsakaicin Matsakaicin (MW)

Nisa: 270mm

Tsawon: 10m

Rage Matsi (Mpa): 10-50

Nau'in: Shet Biyu

(7) Lambar samfur: Matsakaicin matsa lamba (MS)

Nisa: 270mm

Tsawon: 10m

Rage Matsi (Mpa): 10-50

Nau'in: Mono-sheet

Aiki

Nuna rarraba matsa lamba ta daidaitattun launi; yawan launi yana nuna ƙimar matsa lamba kai tsaye.

Aikace-aikace

Ana amfani da Fim ɗin Matsakaicin Matsakaicin a cikin yanki na da'irar Electronics, LCD, Semiconductors, Automotive, Batirin Lithium-ion da Shigar da kayan aikin injiniya, da sauransu.

Tsanaki

(1) L film yana amsawa a hankali har ma da ƙaramin matsa lamba, kar a danna shi kuma shafa shi kafin amfani, rike a hankali.

(2) Lokacin adanawa da ɗauka daga akwatin, ɓangarorin biyu na matosai ya kamata a riƙe su da hannu, kuma kada a danna tsakiyar abin nadi don guje wa tasirin tasirin gwajin.

(3) Shawarwari zafin jiki na 1/2/3LW da MS/MW ne 20 ℃-35 ℃, zafi ne 35% RH-80% RH, 4/5LW ne 15 ℃-30 ℃, zafi ne 20% RH-75% RH. Ana iya rinjayar sahihancin sakamakon idan ba a wannan yankin ba.

(4) Tare da yanayin zafi daban-daban, zafi da yanayin amfani da yanayin lokacin amfani, launi kuma zai bambanta.

(5) Share wurin aunawa kafin amfani, idan ruwa, mai ko wasu abubuwa sun kasance a saman fim ɗin, watakila ba zai iya nuna launi na al'ada ba.

Yi amfani da shi a ƙarƙashin yanayi na musamman: a) Lokacin da aka matsa a babban zafin jiki na dogon lokaci, ya kamata a ƙara kayan daɗaɗɗen zafi zuwa waje na fim don tabbatar da samfurin ba zai shafi yanayin zafi ba. b) A cikin ruwa ko yanayin mai, samfurin ya kamata a sanya shi a cikin jakar da ba ta da ruwa, sannan a matsa lamba don hana samfurin daga haɗuwa da ruwa da mai, wanda zai shafi tasirin launi.

(6) Fim ɗin ma'aunin matsa lamba ba a sake amfani da shi ba.

(7) Amfani a cikin lokacin ingancin da aka bayar.